White High-Purity Polyaluminum Chloride (PAC) is an essential flocculant in water treatment, offering superior performance in both municipal and industrial water systems. Its high efficiency in removing organic and inorganic pollutants makes it a preferred choice for water purification.
Description
White High-Purity Polyaluminum Chloride (PAC) is a highly effective flocculant used in water treatment processes. With its superior performance in removing organic and inorganic pollutants, it is a go-to solution for municipal and industrial water systems. Our PAC is produced using advanced technologies, ensuring high purity and optimal results in various applications.
High Purity: Superior quality for exceptional flocculation efficiency and minimal chemical consumption.
Effective in Water Treatment: Removes suspended solids, organic contaminants, and impurities, improving water quality.
Cost-Effective: Reduces operational costs due to efficient performance at lower dosages.
Environmentally Friendly: Minimal impact on the environment due to its non-toxic nature and high degradation rate.
Stable Performance: Reliable performance across a wide range of water conditions.
Municipal Water Treatment: Widely used in municipal water treatment plants to clarify drinking water, remove impurities, and ensure safe water for communities.
Industrial Wastewater Treatment: Ideal for industries such as textiles, paper, and chemicals, ensuring the efficient removal of contaminants from wastewater.
Drinking Water Treatment: Perfect for ensuring safe and clean drinking water by effectively removing harmful chemicals, bacteria, and organic materials.
Sewage Treatment: Enhances the removal of suspended solids and improves sludge dewatering in sewage treatment plants.
Pulp & Paper Industry: Used to improve drainage and retention during the papermaking process.
Indicator name | Solid index | |
National standard | Company standard | |
Mass fraction of alumina (as AI2O3)/% ≥ | 29 | 30 |
Basicity /% | 45-90 | 40-65 |
Mass fraction of insoluble matter /% ≤ | 0.1 | 0.08 |
PH(10g aqueous solution) | 3.5-5.00.2 | 3.5-5.0 |
Mass fraction of iron (Fe) /%≤ | 0.2 | 0.02 |
Mass fraction of arsenic (As) /% ≤ | 0.0001 | 0.0001 |
Mass fraction of lead (Pb) /% ≤ | 0.0005 | 0.0005 |
Mass fraction of cadmium (Cd) /% ≤ | 0.0001 | 0.0001 |
Mass fraction of mercury (Hg) /% ≤ | 0.00001 | 0.00001 |
Mass fraction of chromium (Cr) /% ≤ | 0.0005 | 0.0005 |
| Note: The mass fractions of insoluble matter, iron, arsenic, lead, cadmium and chromium of the products listed in the table are all calculated based on an AI2O3 content of 10.0%. When the AI2O3 content is greater than 10.0%, the actual content should be converted into a product ratio of 10.0% AI2O3 to calculate the corresponding mass fraction. This product should also comply with relevant national laws, regulations and mandatory standards. | ||
How to Use White High-Purity Polyaluminum Chloride (PAC):
Preparation of Solution:
Concentration: Typically, a 0.1%-0.5% solution is prepared by gradually adding PAC into water while stirring.
Dissolution Time: Ensure complete dissolution of PAC in water, which generally takes less than 30 minutes, depending on the specific grade and water quality.
Application Dosage:
Water Treatment: For municipal or industrial water treatment, the typical dosage ranges from 1-10 mg/L depending on water quality, suspended solids concentration, and desired clarity.
Sewage Treatment: In sewage treatment plants, use approximately 5-20 mg/L PAC, adjusted based on the level of contaminants.
Other Applications: For specific uses such as paper production or industrial wastewater treatment, dosage should be tailored according to the specific treatment needs and pollutant concentration.
Mixing and Control:
Mix PAC solution thoroughly before applying it into the treatment system. Proper dosing and distribution are essential for effective flocculation and sedimentation.
Monitor pH levels to ensure the best performance of PAC (optimal pH range is typically between 4.0 - 7.5).
Storage & Handling:
Storage: Store in a cool, dry place, away from direct sunlight and moisture.
Shelf Life: 12 months from the date of manufacture.
Handling: Use appropriate protective equipment such as gloves and goggles when handling. Avoid direct contact with skin and eyes.
Superior Purity & Performance: Our PAC is manufactured to the highest standards, ensuring optimal performance in water treatment and wastewater management.
Cost-Effective Solution: With excellent efficiency, our PAC reduces the need for large quantities of chemicals, helping you save on operational costs.
Global Supplier: Tairan Chemical is a trusted supplier of high-quality PAC worldwide, providing reliable and consistent products to meet your needs.
Customized Solutions: We offer tailored solutions based on your specific water treatment requirements, ensuring the best possible outcomes.
Tairan Chemical is committed to providing high-quality water treatment chemicals with a focus on innovation and sustainability. With extensive experience in the industry, we deliver reliable products that help you improve your water treatment processes and environmental impact.
Contact us today for bulk orders, pricing information, and technical support. Our team is ready to assist you in selecting the right solution for your needs.
